Manufacturer & Wholesale Distributor of high quality
aftermarket car parts & accessories.

D5 Gauges have adopted a four-wire movement and microprocessor for optimum control and accuracy.

• Warning Point/Light
• Peak Recall/Clear
• German Made Sensors
• Accuracy of ±25%

AC-Autotechnic Introduces the race tech dash. Billet aluminum, smoke lens, this is the only race meter dash that adds dimension, depth, and the total race look, manufactured by AC, the hottest meter dash.

Civic 7pc-Kit. / Integra 9pc-Kit

AC-Autotechnic has revolutionized interior styling with the new S7 Dimensional Gauges, these state-of-the-art gauges utilize Electro-Luminescent technology for maximum style and clarity. The S7 Dimensional Gauges are multi-colored consisting of super white, blue, red, and orange to match any factory interior dash lighting. Adjustments of the brightness can be made via a dash-mounted controller. The actual faces of the gauge overlays are multi-layered giving a sense of depth. The center dials have a brushed aluminum look while the outer circumference incorporates a titanium finish. Precision gauge marks ensure maximum accuracy of the gauge readings.

The S7 EL technology of style, clarity and multi-colored: consisting of super white, blue, red, and orange are introduced through the S7 Race Gauges. The S7 Race Gauges compliment the S7 Series of products with its useful measurements such as oil and water temperature, oil pressure, volt, boost, and air fuel ratio. Each gauge is precision crafted for accuracy as well as designed for maximum visual appeal. / 52mm

The S7 EL technology of style, clarity and multi-colored: consisting of super white, blue, red, and orange are introduced through the S7 Race Gauges. The S7 Race Gauges compliment the S7 Series of products with its useful measurements such as oil and water temperature, oil pressure, volt, boost, and air fuel ratio. Each gauge is precision crafted for accuracy as well as designed for maximum visual appeal. / 52mm

AC-Autotechnic has revolutionized interior styling with the new S7 Dimensional Gauges, these state-of-the-art gauges utilize Electro-Luminescent technology for maximum style and clarity. The S7 Dimensional Gauges are multi-colored consisting of super white, blue, red, and orange to match any factory interior dash lighting. Adjustments of the brightness can be made via a dash-mounted controller. The actual faces of the gauge overlays are multi-layered giving a sense of depth. The center dials have a brushed aluminum look while the outer circumference incorporates a titanium finish. Precision gauge marks ensure maximum accuracy of the gauge readings.

Overlays style is incorporated / imprinted into the EL designs, since some application can not use the acrylic aluminum overlays.

Designed with the same innovative features found on the S7 Dimensional Gauges and the S7 Race Gauges, the S7 Tachometer comes in an easy to read 5" diameter face. Peak Recall mode is incorporated into the tachometer. An integrated shift light can be pre-set to illuminate to the driver's specific shift point.

The AC-Autotechnics, CNC-Machined aluminum Intrumental gauge pods incorporates the most versatile design. The AC Gauge Pods, is an universal pod that accentuates in the mounting of instrumental gauges to many different vehicle specifications. AC's aluminum gauge pods are designed with an adjusteable bracket for many positions.

This revolutionized design compliments our intrumental gauges with maximum visual appeal as well as secure mounting of the gauges. / 52mm.

The Dash Pod is your more traditional gauge holder mounting on the top of the dash.

All ProPod Dash Pods are model specific and are made for an exact fit. Dimensions vary by car model.

The Spek™ Boost controller has built in Adaptive Traction Control (ATC) that can learn your Car or Truck and can be taught not to over- boost in the lower gears to prevent tire spin.  Scramble mode and programmable RED-line over-boost cut.    Spek ™ controllers are all electric and microprocessor based.  The patented Wide-Angle Dial design creates the largest viewing dial ever mounted on a 2 1/16” gauge. High intensity LED technology and light distribution is designed for day or night driving with programmable dimmer setting for both Day/Night.  Seven color programmable faceplate illumination in Red, Blue, Green, Orange, Yellow, Purple or White.  Both the dial and pointer brightness are individually adjustable to match factory OEM gauges.  Brushless stepper motor for an accurate pointer reading of a 280 degree full sweep analog readout. Gauges are programmed through patented water resistant stainless steel sealed command keys located on the faceplate for demanding environments.  No control boxes or hand-held remote control needed.  Peak playback value can be retrieved. High and Low lighted alert levels can be set with programmable outputs signal to activate relays or communicate to other SPEK controllers.  Spek™ gauges come with a plug receptacle for connecting the sender wiring harnesses. Self diagnostics software will flash display if the sensor signal is lost.

Features:

• Brushless Stepper motor with full sweep 280 degree pointer.
• 7 color background setting with day and night background and pointer dimmer
• Teach and learn Adaptive traction control to help control tire spin from over-boosting in lower gears
• Replaceable external MAP pressure sensor with temperature compensation.
• Plug and Play wire harness for easy installation
• Patented lighting delivers one of the largest and brightest displays ever assembled on a 2 1/6 inch gauge
• Peak playback displays highest Boost level
• Programmable output to control relays or communicate to other Spek controllers.
• Scramble boost and Red-line over-boost protection
• Available in Smoked or Clear Lens, Chrome or Black Bezel with White, Silver or Black display
• Fits standard 2 1/16 inch ProPods mounting Pods, Dash Pod or universal #81102 steering column mount.
• Easy to read Analog pointer (No flashing and blinking digital displays.)
• Optional: relay wire harness 10 foot #12 gauge wire water resistant relay 40 amp Part #14820

The Spek™ Boost controller has built in Adaptive Traction Control (ATC) that can learn your Car or Truck and can be taught not to over- boost in the lower gears to prevent tire spin.  Scramble mode and programmable RED-line over-boost cut.    Spek ™ controllers are all electric and microprocessor based.  The patented Wide-Angle Dial design creates the largest viewing dial ever mounted on a 2 1/16” gauge. High intensity LED technology and light distribution is designed for day or night driving with programmable dimmer setting for both Day/Night.  Seven color programmable faceplate illumination in Red, Blue, Green, Orange, Yellow, Purple or White.  Both the dial and pointer brightness are individually adjustable to match factory OEM gauges.  Brushless stepper motor for an accurate pointer reading of a 280 degree full sweep analog readout. Gauges are programmed through patented water resistant stainless steel sealed command keys located on the faceplate for demanding environments.  No control boxes or hand-held remote control needed.  Peak playback value can be retrieved. High and Low lighted alert levels can be set with programmable outputs signal to activate relays or communicate to other SPEK controllers.  Spek™ gauges come with a plug receptacle for connecting the sender wiring harnesses. Self diagnostics software will flash display if the sensor signal is lost.

Features:

• Brushless Stepper motor with full sweep 280 degree pointer.
• 7 color background setting with day and night background and pointer dimmer
• Teach and learn Adaptive traction control to help control tire spin from over-boosting in lower gears
• Replaceable external MAP pressure sensor with temperature compensation.
• Plug and Play wire harness for easy installation
• Patented lighting delivers one of the largest and brightest displays ever assembled on a 2 1/6 inch gauge
• Peak playback displays highest Boost level
• Programmable output to control relays or communicate to other Spek controllers.
• Scramble boost and Red-line over-boost protection
• Available in Smoked or Clear Lens, Chrome or Black Bezel with White, Silver or Black display
• Fits standard 2 1/16 inch ProPods mounting Pods, Dash Pod or universal #81102 steering column mount.
• Easy to read Analog pointer (No flashing and blinking digital displays.)
• Optional: relay wire harness 10 foot #12 gauge wire water resistant relay 40 amp Part #14820

The Spek™ Boost controller has built in Adaptive Traction Control (ATC) that can learn your Car or Truck and can be taught not to over- boost in the lower gears to prevent tire spin. Scramble mode and programmable RED-line over-boost cut. Spek ™ controllers are all electric and microprocessor based.  The patented Wide-Angle Dial design creates the largest viewing dial ever mounted on a 2 1/16” gauge. High intensity LED technology and light distribution is designed for day or night driving with programmable dimmer setting for both Day/Night.  Seven color programmable faceplate illumination in Red, Blue, Green, Orange, Yellow, Purple or White.  Both the dial and pointer brightness are individually adjustable to match factory OEM gauges.  Brushless stepper motor for an accurate pointer reading of a 280 degree full sweep analog readout. Gauges are programmed through patented water resistant stainless steel sealed command keys located on the faceplate for demanding environments.  No control boxes or hand-held remote control needed.  Peak playback value can be retrieved. High and Low lighted alert levels can be set with programmable outputs signal to activate relays or communicate to other SPEK controllers.  Spek™ gauges come with a plug receptacle for connecting the sender wiring harnesses. Self diagnostics software will flash display if the sensor signal is lost.

Features:

• Brushless Stepper motor with full sweep 280 degree pointer.
• 7 color background setting with day and night background and pointer dimmer
• Teach and learn Adaptive traction control to help control tire spin from over-boosting in lower gears
• Replaceable external MAP pressure sensor with temperature compensation.
• Plug and Play wire harness for easy installation
• Patented lighting delivers one of the largest and brightest displays ever assembled on a 2 1/6 inch gauge
• Peak playback displays highest Boost level
• Programmable output to control relays or communicate to other Spek controllers.
• Scramble boost and Red-line over-boost protection
• Available in Smoked or Clear Lens, Chrome or Black Bezel with White, Silver or Black display
• Fits standard 2 1/16 inch ProPods mounting Pods, Dash Pod or universal #81102 steering column mount.
• Easy to read Analog pointer (No flashing and blinking digital displays.)
• Optional: relay wire harness 10 foot #12 gauge wire water resistant relay 40 amp Part #14820

One and two gauge propods allow the driver easy viewing of the gauges while having a great custom factory finish. Propods mount on the A-Pillar allowing the driver a total view of the road. They are made with Heat Temp. U/V resistant (ABS) plasticmaterials and are paintable.

Spek™ instruments are all electric and microprocessor controlled. The Wide-Angle Dial™ design creates a 15% larger viewing area on a 2 1/16" gauge. This is accomplished by adding a shoulder at the faceplate to create a 60mm dial. The faceplate illumination is programmable to one of seven colors to blend in with original manufacturer’s gauges. A stepper motor is supplied for the accurate pointer reading of a 280 degree sweep and control of returning the pointer to zero when power is removed. Gauges are programmed through water resistant stainless steel sealed command keys located on the faceplate. No control boxes or hand-held remote control needed. Peak playback value can be retrieved, high and low alert levels set, and programmable output signal activated. Spek™ gauges come with a plug receptacle for connecting the sender wiring harnesses. This plug and play technology significantly decreases installation time. The Spek™ performance gauges are designed to improve monitoring, display and control of precision engines to meet customer expectations and surpass industry standards.

Spek™ performance gauges and Sully™ performance gauges look alike. Each has a similar housing, faceplate, lighted pointer and illumination, but the electronics differ. Spek™ is microprocessor based with programming keys mounted on the faceplate. It is capable of monitoring high and low levels and activating an output control module. Sully™ gauges utilize solid state electronics. It uses an air coil stepping motor to drive a 280 or 90 degree pointer sweep. Dip switches are provided to select faceplate color illumination. Both gauge series are available with a choice of lens, clear or smoked, and bezels, black or chrome, to customize these instruments to your vehicle. You can design gauges from one series or mix and match gauges from each series. The Design Series™ permits you to customize your gauge kits to meet the precision and aesthetic requirements of your vehicle.

The SPEK Nitrous Oxide (NO2)RPM controller has built in Adaptive Traction Control (ATC) that can learn your Car or Truck’s acceleration and can be taught not to release NO2 in lower gears to prevent tire spin. The Spek controller learns your wide open throttle position sensor to ensure the NO2 valve is not released unless the throttle is wide open. In addition the tachometer has built-in High and Low set points to trigger an output for other devices or communicate to other Spek controller. For example you can use our NO2 controller to spool large Turbo’s up to desired Boost levels and us our Boost controller to deactivate the NO2 valve when the desired boost level is met. Stage one and two outputs control the NO2 valve from LOW turn ON to High RED-line deactivate. If you purchase a Spek Fuel pressure gauge, it can turn the NO2 valve Off if there is a loss of Fuel pressure before possible engine damage occurs. The patented Wide-Angle Dial design creates one of the largest dial ever mounted on a 2 1/16 inch gauge. A High intensity LED technology is used with both Day and Night time dimmer settings. The pointer and back ground lighting are both adjustable with  7 color background lighting to choose from. A Brushless stepper motor is used for a accurate pointer reading. Spek gauges are programmed through patented water resistant stainless steel command keys located on the faceplate for demanding environments. No control boxes or hand-held remote programmers are needed. Peak playback value can be retrieved. Spek gauges come with 10 foot wire harness for plug and play installations. Self diagnostics software will flash the background if the setup is not completed properly or a sensor input is lost. Built in Heads UP Shift lights that are amber one at a time until the Red-line set point is activated and they all turn RED with brightness control. The Five inch Tachometer has a standard 2 1/16 inch base and can be mounted on a A-pillar Pod with optional patent pending mounting adapter # 81105.

Features:

• Stage One or Two relay output control. Requires optional relays and harness.
• Brushless stepper motor with full sweep 280 degree pointer.
• communicates to other SPEK fuel pressure and Boost controllers
• 7 Color background setting with day and night dimmer settings.
• PEAK playback
• Programmable output to turn on a 2 amp loads or high current relays.
• Fits standard 2 1/16 inch ProParts pods
• Plug and Play wire harness 10 foot wire standard

The SPEK Nitrous Oxide (NO2)RPM controller has built in Adaptive Traction Control (ATC) that can learn your Car or Truck’s acceleration and can be taught not to release NO2 in lower gears to prevent tire spin. The Spek controller learns your wide open throttle position sensor to ensure the NO2 valve is not released unless the throttle is wide open. In addition the tachometer has built-in High and Low set points to trigger an output for other devices or communicate to other Spek controller. For example you can use our NO2 controller to spool large Turbo’s up to desired Boost levels and us our Boost controller to deactivate the NO2 valve when the desired boost level is met. Stage one and two outputs control the NO2 valve from LOW turn ON to High RED-line deactivate. If you purchase a Spek Fuel pressure gauge, it can turn the NO2 valve Off if there is a loss of Fuel pressure before possible engine damage occurs. The patented Wide-Angle Dial design creates one of the largest dial ever mounted on a 2 1/16 inch gauge. A High intensity LED technology is used with both Day and Night time dimmer settings. The pointer and back ground lighting are both adjustable with  7 color background lighting to choose from. A Brushless stepper motor is used for a accurate pointer reading. Spek gauges are programmed through patented water resistant stainless steel command keys located on the faceplate for demanding environments. No control boxes or hand-held remote programmers are needed. Peak playback value can be retrieved. Spek gauges come with 10 foot wire harness for plug and play installations. Self diagnostics software will flash the background if the setup is not completed properly or a sensor input is lost. Built in Heads UP Shift lights that are amber one at a time until the Red-line set point is activated and they all turn RED with brightness control. The Five inch Tachometer has a standard 2 1/16 inch base and can be mounted on a A-pillar Pod with optional patent pending mounting adapter # 81105.

Features:

• Stage One or Two relay output control. Requires optional relays and harness.
• Brushless stepper motor with full sweep 280 degree pointer.
• communicates to other SPEK fuel pressure and Boost controllers
• 7 Color background setting with day and night dimmer settings.
• PEAK playback
• Programmable output to turn on a 2 amp loads or high current relays.
• Fits standard 2 1/16 inch ProParts pods
• Plug and Play wire harness 10 foot wire standard
• Built in Heads Up Amber/RED shift lights with brightness control

The SPEK Nitrous Oxide (NO2)RPM controller has built in Adaptive Traction Control (ATC) that can learn your Car or Truck’s acceleration and can be taught not to release NO2 in lower gears to prevent tire spin. The Spek controller learns your wide open throttle position sensor to ensure the NO2 valve is not released unless the throttle is wide open. In addition the tachometer has built-in High and Low set points to trigger an output for other devices or communicate to other Spek controller. For example you can use our NO2 controller to spool large Turbo’s up to desired Boost levels and us our Boost controller to deactivate the NO2 valve when the desired boost level is met. Our progressive output NO2 Digital controller is adjustable along a wide range of RPM’s settings with adjustable duty cycles. In addition we monitor the valve to ensure it is working properly. If you purchase a Spek Fuel pressure gauge, it can turn the NO2 valve Off if there is a loss of Fuel pressure before possible engine damage occurs. The patented Wide-Angle Dial design creates one of the largest dial ever mounted on a 2 1/16 inch gauge. A High intensity LED technology is used with both Day and Night time dimmer settings. The pointer and back ground lighting are both adjustable with  7 color background lighting to choose from. A Brushless stepper motor is used for a accurate pointer reading. Spek gauges are programmed through patented water resistant stainless steel command keys located on the faceplate for demanding environments. No control boxes or hand-held remote programmers are needed. Peak playback value can be retrieved. Spek gauges come with 10 foot wire harness for plug and play installations. Self diagnostics software will flash the background if the setup is not completed properly or a sensor input is lost.

Features:

• Progressive NO2 digital control module #14612 to monitors the NO2 valve
• Brushless stepper motor with full sweep 280 degree pointer.
• communicates to other SPEK fuel pressure and Boost controllers
• 7 Color background setting with day and night dimmer settings.
• PEAK playback
• Programmable outputs to turn on a 2 amp loads or high current relays.
• Fits standard 2 1/16 inch ProParts pods, Dash Pods and universal #81102 steering column mount.
• Plug and Play wire harness 10 foot wire standard
• Available in Black or Chrome bezel Smoked or Clear lens, White, Black or Silver Dial.

The SPEK Nitrous Oxide (NO2)RPM controller has built in Adaptive Traction Control (ATC) that can learn your Car or Truck’s acceleration and can be taught not to release NO2 in lower gears to prevent tire spin. The Spek controller learns your wide open throttle position sensor to ensure the NO2 valve is not released unless the throttle is wide open. In addition the tachometer has built-in High and Low set points to trigger an output for other devices or communicate to other Spek controller. For example you can use our NO2 controller to spool large Turbo’s up to desired Boost levels and us our Boost controller to deactivate the NO2 valve when the desired boost level is met. Our progressive output NO2 Digital controller is adjustable along a wide range of RPM’s settings with adjustable duty cycles. In addition we monitor the valve to ensure it is working properly. If you purchase a Spek Fuel pressure gauge, it can turn the NO2 valve Off if there is a loss of Fuel pressure before possible engine damage occurs. The patented Wide-Angle Dial design creates one of the largest dial ever mounted on a 2 1/16 inch gauge. A High intensity LED technology is used with both Day and Night time dimmer settings. The pointer and back ground lighting are both adjustable with  7 color background lighting to choose from. A Brushless stepper motor is used for a accurate pointer reading. Spek gauges are programmed through patented water resistant stainless steel command keys located on the faceplate for demanding environments. No control boxes or hand-held remote programmers are needed. Peak playback value can be retrieved. Spek gauges come with 10 foot wire harness for plug and play installations. Self diagnostics software will flash the background if the setup is not completed properly or a sensor input is lost.

Features:

• Progressive NO2 digital control module #14612 to monitors the NO2 valve
• Brushless stepper motor with full sweep 280 degree pointer.
• communicates to other SPEK fuel pressure and Boost controllers
• 7 Color background setting with day and night dimmer settings.
• PEAK playback
• Programmable outputs to turn on a 2 amp loads or high current relays.
• Fits standard 2 1/16 inch ProParts pods, Dash Pods and universal #81102 steering column mount.
• Plug and Play wire harness 10 foot wire standard
• Available in Black or Chrome bezel Smoked or Clear lens, White, Black or Silver Dial.

The SPEK Nitrous Oxide (NO2)RPM controller has built in Adaptive Traction Control (ATC) that can learn your Car or Truck’s acceleration and can be taught not to release NO2 in lower gears to prevent tire spin. The Spek controller learns your wide open throttle position sensor to ensure the NO2 valve is not released unless the throttle is wide open. In addition the tachometer has built-in High and Low set points to trigger an output for other devices or communicate to other Spek controller. For example you can use our NO2 controller to spool large Turbo’s up to desired Boost levels and us our Boost controller to deactivate the NO2 valve when the desired boost level is met. Our progressive output NO2 Digital controller is adjustable along a wide range of RPM’s settings with adjustable duty cycles. In addition we monitor the valve to ensure it is working properly. If you purchase a Spek Fuel pressure gauge, it can turn the NO2 valve Off if there is a loss of Fuel pressure before possible engine damage occurs. The patented Wide-Angle Dial design creates one of the largest dial ever mounted on a 2 1/16 inch gauge. A High intensity LED technology is used with both Day and Night time dimmer settings. The pointer and back ground lighting are both adjustable with  7 color background lighting to choose from. A Brushless stepper motor is used for a accurate pointer reading. Spek gauges are programmed through patented water resistant stainless steel command keys located on the faceplate for demanding environments. No control boxes or hand-held remote programmers are needed. Peak playback value can be retrieved. Spek gauges come with 10 foot wire harness for plug and play installations. Self diagnostics software will flash the background if the setup is not completed properly or a sensor input is lost.

Features:

• Progressive NO2 digital control module #14612 to monitors the NO2 valve
• Brushless stepper motor with full sweep 280 degree pointer.
• communicates to other SPEK fuel pressure and Boost controllers
• 7 Color background setting with day and night dimmer settings.
• PEAK playback
• Programmable outputs to turn on a 2 amp loads or high current relays.
• Fits standard 2 1/16 inch ProParts pods, Dash Pods and universal #81102 steering column mount.
• Plug and Play wire harness 10 foot wire standard
• Available in Black or Chrome bezel Smoked or Clear lens, White, Black or Silver Dial.

One and two gauge propods allow the driver easy viewing of the gauges while having a great custom factory finish. Propods mount on the A-Pillar allowing the driver a total view of the road. They are made with Heat Temp. U/V resistant (ABS) plasticmaterials and are paintable.

Spek™ instruments are all electric and microprocessor controlled. The Wide-Angle Dial™ design creates a 15% larger viewing area on a 2 1/16" gauge. This is accomplished by adding a shoulder at the faceplate to create a 60mm dial. The faceplate illumination is programmable to one of seven colors to blend in with original manufacturer’s gauges. A stepper motor is supplied for the accurate pointer reading of a 280 degree sweep and control of returning the pointer to zero when power is removed. Gauges are programmed through water resistant stainless steel sealed command keys located on the faceplate. No control boxes or hand-held remote control needed. Peak playback value can be retrieved, high and low alert levels set, and programmable output signal activated. Spek™ gauges come with a plug receptacle for connecting the sender wiring harnesses. This plug and play technology significantly decreases installation time. The Spek™ performance gauges are designed to improve monitoring, display and control of precision engines to meet customer expectations and surpass industry standards.

Spek™ performance gauges and Sully™ performance gauges look alike. Each has a similar housing, faceplate, lighted pointer and illumination, but the electronics differ. Spek™ is microprocessor based with programming keys mounted on the faceplate. It is capable of monitoring high and low levels and activating an output control module. Sully™ gauges utilize solid state electronics. It uses an air coil stepping motor to drive a 280 or 90 degree pointer sweep. Dip switches are provided to select faceplate color illumination. Both gauge series are available with a choice of lens, clear or smoked, and bezels, black or chrome, to customize these instruments to your vehicle. You can design gauges from one series or mix and match gauges from each series. The Design Series™ permits you to customize your gauge kits to meet the precision and aesthetic requirements of your vehicle.

One and two gauge propods allow the driver easy viewing of the gauges while having a great custom factory finish. Propods mount on the A-Pillar allowing the driver a total view of the road. They are made with Heat Temp. U/V resistant (ABS) plasticmaterials and are paintable.

Spek™ instruments are all electric and microprocessor controlled. The Wide-Angle Dial™ design creates a 15% larger viewing area on a 2 1/16" gauge. This is accomplished by adding a shoulder at the faceplate to create a 60mm dial. The faceplate illumination is programmable to one of seven colors to blend in with original manufacturer’s gauges. A stepper motor is supplied for the accurate pointer reading of a 280 degree sweep and control of returning the pointer to zero when power is removed. Gauges are programmed through water resistant stainless steel sealed command keys located on the faceplate. No control boxes or hand-held remote control needed. Peak playback value can be retrieved, high and low alert levels set, and programmable output signal activated. Spek™ gauges come with a plug receptacle for connecting the sender wiring harnesses. This plug and play technology significantly decreases installation time. The Spek™ performance gauges are designed to improve monitoring, display and control of precision engines to meet customer expectations and surpass industry standards.

Spek™ performance gauges and Sully™ performance gauges look alike. Each has a similar housing, faceplate, lighted pointer and illumination, but the electronics differ. Spek™ is microprocessor based with programming keys mounted on the faceplate. It is capable of monitoring high and low levels and activating an output control module. Sully™ gauges utilize solid state electronics. It uses an air coil stepping motor to drive a 280 or 90 degree pointer sweep. Dip switches are provided to select faceplate color illumination. Both gauge series are available with a choice of lens, clear or smoked, and bezels, black or chrome, to customize these instruments to your vehicle. You can design gauges from one series or mix and match gauges from each series. The Design Series™ permits you to customize your gauge kits to meet the precision and aesthetic requirements of your vehicle.

One and two gauge propods allow the driver easy viewing of the gauges while having a great custom factory finish. Propods mount on the A-Pillar allowing the driver a total view of the road. They are made with Heat Temp. U/V resistant (ABS) plasticmaterials and are paintable.

Spek™ instruments are all electric and microprocessor controlled. The Wide-Angle Dial™ design creates a 15% larger viewing area on a 2 1/16" gauge. This is accomplished by adding a shoulder at the faceplate to create a 60mm dial. The faceplate illumination is programmable to one of seven colors to blend in with original manufacturer’s gauges. A stepper motor is supplied for the accurate pointer reading of a 280 degree sweep and control of returning the pointer to zero when power is removed. Gauges are programmed through water resistant stainless steel sealed command keys located on the faceplate. No control boxes or hand-held remote control needed. Peak playback value can be retrieved, high and low alert levels set, and programmable output signal activated. Spek™ gauges come with a plug receptacle for connecting the sender wiring harnesses. This plug and play technology significantly decreases installation time. The Spek™ performance gauges are designed to improve monitoring, display and control of precision engines to meet customer expectations and surpass industry standards.

Spek™ performance gauges and Sully™ performance gauges look alike. Each has a similar housing, faceplate, lighted pointer and illumination, but the electronics differ. Spek™ is microprocessor based with programming keys mounted on the faceplate. It is capable of monitoring high and low levels and activating an output control module. Sully™ gauges utilize solid state electronics. It uses an air coil stepping motor to drive a 280 or 90 degree pointer sweep. Dip switches are provided to select faceplate color illumination. Both gauge series are available with a choice of lens, clear or smoked, and bezels, black or chrome, to customize these instruments to your vehicle. You can design gauges from one series or mix and match gauges from each series. The Design Series™ permits you to customize your gauge kits to meet the precision and aesthetic requirements of your vehicle.

One and two gauge propods allow the driver easy viewing of the gauges while having a great custom factory finish. Propods mount on the A-Pillar allowing the driver a total view of the road. They are made with Heat Temp. U/V resistant (ABS) plasticmaterials and are paintable.

Spek™ instruments are all electric and microprocessor controlled. The Wide-Angle Dial™ design creates a 15% larger viewing area on a 2 1/16" gauge. This is accomplished by adding a shoulder at the faceplate to create a 60mm dial. The faceplate illumination is programmable to one of seven colors to blend in with original manufacturer’s gauges. A stepper motor is supplied for the accurate pointer reading of a 280 degree sweep and control of returning the pointer to zero when power is removed. Gauges are programmed through water resistant stainless steel sealed command keys located on the faceplate. No control boxes or hand-held remote control needed. Peak playback value can be retrieved, high and low alert levels set, and programmable output signal activated. Spek™ gauges come with a plug receptacle for connecting the sender wiring harnesses. This plug and play technology significantly decreases installation time. The Spek™ performance gauges are designed to improve monitoring, display and control of precision engines to meet customer expectations and surpass industry standards.

Spek™ performance gauges and Sully™ performance gauges look alike. Each has a similar housing, faceplate, lighted pointer and illumination, but the electronics differ. Spek™ is microprocessor based with programming keys mounted on the faceplate. It is capable of monitoring high and low levels and activating an output control module. Sully™ gauges utilize solid state electronics. It uses an air coil stepping motor to drive a 280 or 90 degree pointer sweep. Dip switches are provided to select faceplate color illumination. Both gauge series are available with a choice of lens, clear or smoked, and bezels, black or chrome, to customize these instruments to your vehicle. You can design gauges from one series or mix and match gauges from each series. The Design Series™ permits you to customize your gauge kits to meet the precision and aesthetic requirements of your vehicle.

One and two gauge propods allow the driver easy viewing of the gauges while having a great custom factory finish. Propods mount on the A-Pillar allowing the driver a total view of the road. They are made with Heat Temp. U/V resistant (ABS) plasticmaterials and are paintable.

Spek™ instruments are all electric and microprocessor controlled. The Wide-Angle Dial™ design creates a 15% larger viewing area on a 2 1/16" gauge. This is accomplished by adding a shoulder at the faceplate to create a 60mm dial. The faceplate illumination is programmable to one of seven colors to blend in with original manufacturer’s gauges. A stepper motor is supplied for the accurate pointer reading of a 280 degree sweep and control of returning the pointer to zero when power is removed. Gauges are programmed through water resistant stainless steel sealed command keys located on the faceplate. No control boxes or hand-held remote control needed. Peak playback value can be retrieved, high and low alert levels set, and programmable output signal activated. Spek™ gauges come with a plug receptacle for connecting the sender wiring harnesses. This plug and play technology significantly decreases installation time. The Spek™ performance gauges are designed to improve monitoring, display and control of precision engines to meet customer expectations and surpass industry standards.

Spek™ performance gauges and Sully™ performance gauges look alike. Each has a similar housing, faceplate, lighted pointer and illumination, but the electronics differ. Spek™ is microprocessor based with programming keys mounted on the faceplate. It is capable of monitoring high and low levels and activating an output control module. Sully™ gauges utilize solid state electronics. It uses an air coil stepping motor to drive a 280 or 90 degree pointer sweep. Dip switches are provided to select faceplate color illumination. Both gauge series are available with a choice of lens, clear or smoked, and bezels, black or chrome, to customize these instruments to your vehicle. You can design gauges from one series or mix and match gauges from each series. The Design Series™ permits you to customize your gauge kits to meet the precision and aesthetic requirements of your vehicle.

One and two gauge propods allow the driver easy viewing of the gauges while having a great custom factory finish. Propods mount on the A-Pillar allowing the driver a total view of the road. They are made with Heat Temp. U/V resistant (ABS) plasticmaterials and are paintable.

Spek™ instruments are all electric and microprocessor controlled. The Wide-Angle Dial™ design creates a 15% larger viewing area on a 2 1/16" gauge. This is accomplished by adding a shoulder at the faceplate to create a 60mm dial. The faceplate illumination is programmable to one of seven colors to blend in with original manufacturer’s gauges. A stepper motor is supplied for the accurate pointer reading of a 280 degree sweep and control of returning the pointer to zero when power is removed. Gauges are programmed through water resistant stainless steel sealed command keys located on the faceplate. No control boxes or hand-held remote control needed. Peak playback value can be retrieved, high and low alert levels set, and programmable output signal activated. Spek™ gauges come with a plug receptacle for connecting the sender wiring harnesses. This plug and play technology significantly decreases installation time. The Spek™ performance gauges are designed to improve monitoring, display and control of precision engines to meet customer expectations and surpass industry standards.

Spek™ performance gauges and Sully™ performance gauges look alike. Each has a similar housing, faceplate, lighted pointer and illumination, but the electronics differ. Spek™ is microprocessor based with programming keys mounted on the faceplate. It is capable of monitoring high and low levels and activating an output control module. Sully™ gauges utilize solid state electronics. It uses an air coil stepping motor to drive a 280 or 90 degree pointer sweep. Dip switches are provided to select faceplate color illumination. Both gauge series are available with a choice of lens, clear or smoked, and bezels, black or chrome, to customize these instruments to your vehicle. You can design gauges from one series or mix and match gauges from each series. The Design Series™ permits you to customize your gauge kits to meet the precision and aesthetic requirements of your vehicle.

One and two gauge propods allow the driver easy viewing of the gauges while having a great custom factory finish. Propods mount on the A-Pillar allowing the driver a total view of the road. They are made with Heat Temp. U/V resistant (ABS) plasticmaterials and are paintable.

Spek™ instruments are all electric and microprocessor controlled. The Wide-Angle Dial™ design creates a 15% larger viewing area on a 2 1/16" gauge. This is accomplished by adding a shoulder at the faceplate to create a 60mm dial. The faceplate illumination is programmable to one of seven colors to blend in with original manufacturer’s gauges. A stepper motor is supplied for the accurate pointer reading of a 280 degree sweep and control of returning the pointer to zero when power is removed. Gauges are programmed through water resistant stainless steel sealed command keys located on the faceplate. No control boxes or hand-held remote control needed. Peak playback value can be retrieved, high and low alert levels set, and programmable output signal activated. Spek™ gauges come with a plug receptacle for connecting the sender wiring harnesses. This plug and play technology significantly decreases installation time. The Spek™ performance gauges are designed to improve monitoring, display and control of precision engines to meet customer expectations and surpass industry standards.

Spek™ performance gauges and Sully™ performance gauges look alike. Each has a similar housing, faceplate, lighted pointer and illumination, but the electronics differ. Spek™ is microprocessor based with programming keys mounted on the faceplate. It is capable of monitoring high and low levels and activating an output control module. Sully™ gauges utilize solid state electronics. It uses an air coil stepping motor to drive a 280 or 90 degree pointer sweep. Dip switches are provided to select faceplate color illumination. Both gauge series are available with a choice of lens, clear or smoked, and bezels, black or chrome, to customize these instruments to your vehicle. You can design gauges from one series or mix and match gauges from each series. The Design Series™ permits you to customize your gauge kits to meet the precision and aesthetic requirements of your vehicle.

Features:

• 7 color programmable backgroung display with Wide Angle Dial™ (patent pending).
• 280º sweep stepper motor control with programmable stainless steel water resistant command keys.
• Low water warning display and flashing background warning lights for added protection.
• Motor monitoring to determine if the motor is working properly.
• Programmable digitally controlled pulse width modulation (PWM) to vary the motor speed based on MAP and MAF sensor readings.
• User interface allows operator to adjust flow rates and duty cycle without any external boxes.

Features:

• 7 color programmable backgroung display with Wide Angle Dial™ (patent pending).
• 280º sweep stepper motor control with programmable stainless steel water resistant command keys.
• Low water warning display and flashing background warning lights for added protection.
• Motor monitoring to determine if the motor is working properly.
• Programmable digitally controlled pulse width modulation (PWM) to vary the motor speed based on MAP and MAF sensor readings.
• User interface allows operator to adjust flow rates and duty cycle without any external boxes.

Features

• Brushless stepper motor with full sweep 280 degree lighted analog pointer
• 7 color background setting with day and night background and pointer dimmer.
• Digital proportional motor driver with motor current monitoring protection and pump
• Built in Turbo timer with Low temperature set point
• Peak playback that will display the highest EGT reading
• Programmable High limit set point to turn on a relay or communicate to other Spek controllers.
• Patented lighting delivers one of the largest and brightest displays ever assembled on a 2 1/16 inch gauge.
• Mounts on a standard ProParts Pods, Dash Pod or #81102 universal steering column mount
• Teach and Learn software acquires factory MAP and MAF onboard sensor data without the need to install sensors
• Self diagnostics software will flash background lighting if sensor signal is lost
• Plug and Play wire harness for easy installation
• Purchase a Spek Fuel pressure gauge to turn off pump motor controller if Fuel pressure is lost
• Available in Smoked or Clear lens, Chrome or Black bezel White, Silver or Black  display